Aluminum Patio Covers

Pergotenda Iridium

The Iridium is our most classic aluminum Pergotenda design. With a wide range of sizes and multiple options, the wall mounted Iridium is one of our more versatile designs with the ability to match any outdoor living style.

The Iridium is a retractable cover system mounted to a wall, custom made to protect against sun and rain. The fabric is supported by intermediate supporting tubes and terminal bars set parallel to one another approximately every 24″ on pitched version and every 20″ on flat version. The Iridium system is set in motion by a radio-controlled Dunker D839 motor with either Somfy or Nice brand receiver. The canvas moves by sliding on the runners on carriers with 6 asymmetrical wheels with a capacity of about 1000 lbs. Each.
The toothed Kevlar transmission belt has stainless steel cables and resists high salinity environments.

The tensile strength is of 2,000 lbs at break. The transmission belt is inserted in each runner, controlled by the drive pulley and a single drive shaft that guarantees the smooth movement of the canvas. Hardware and accessories are 304 stainless steel.

Pergotenda Iridium Product Gallery

Pergotenda Iridium Features

Anti-drip System – weldable PVC profile on the upper part of the canvas for lateral rainwater retention. This PVC profile is welded to each far side of a pitched roof canopy to prevent water from dripping over the sides and forces the water into the gutter system.

Anti-Spray Profile – PVC profile inserted on the lateral side of the runner for retention of rainwater spray. Always in addition to the Anti-Drip System, the Anti-Spray prevents water from a heavy downpour from “splashing” over the Anti-Drip profile and dripping over the sides.

Motor Beam – Aluminum profile and corresponding accessories to be fixed to self-supporting motor or, in addition, to support the protective cover.

Motorization – All Pergotenda are motorized, giving you complete control at the touch of a button.

Pergotenda Iridium Options

Add-On Intermediate Support Tube – used to reduce the height of the canopy swag when the roof unit retracted, usually for the purposes of clearing a door opening or a window.

Add -On Runner – the mechanical runner is the equivalent of roof truss or rafter and is what the roof canopy is attached to. Adding a runner is considered when the roof pitch angle needs to be reduced to properly shed water and manage it into the gutter systems. Adding a runner mat also be considered to reduce the pitch of the roof for design purposes as well.

Faux Ceiling – a unique option that hangs a colorful fabric beneath the roofing material to add warmth and atmosphere to the room. The Faux Ceiling fabric can provide the excellent opportunity to blend other colors or materials that are part of furnishings or cushions. The softer fabric material may also be a benefit in reducing the noise.

Hood – The Protective Hood Cover is an aluminum corrugated standing seam cover that is positioned where the unit mounts to the wall or to the back of the unit if it’s a freestanding model. It is designed to protect the Roof Canopy Swags when they are retracted and to prevent any water or debris from
Lighting – the Pergotenda lighting system is a custom designed system that seamlessly integrates into the Pergotenda intermediate tubes.

Pitched or Flat – both pitched roof and flat roof options are available.

Stratus Screen – an exterior screen specifically designed to integrate into most Pergotenda systems for complete enclosure.

Gable – pitched versions only. A fixed fabric portion used to enclose the angled gap on both sides of a pitched system when using screens

Front Beam – required in order to strengthen the structure with projection over 157″, but not necessary if front screens are installed

Retractable Gutter – extruded aluminum profile for rainwater collection, only for pitched version, fixed to the end support tube. The gutters move with the roof canopy and has downspouts that merge into each front supporting post.

Trapezoidal Fabric – flat versions only. An alternate drainage option for flat systems to let you control which side of the system you want rain to fall off.

Underside Drip-Collection Rim – flat versions only. Welded PVC profile on the underside of the roof canopy to channel water into the side gutters and to prevent water from running along the underside of the roof canopy and dripping down and collecting in the swags. The Protective Hood Cover is powder coated for longevity.

Consultation Request

Free in home or business consultation and estimates. We also install your window coverings.

Authorized Dealer

PureTech Window Fashion is an authorized dealer for Corradi, Graber, Hunter Douglas, Insolroll Window Shading Systems, MechoSystems, Blynco Window Fashions and Somfy. Contact us today for all of your window fashion needs.

Call Now Button